120 metres in one piece
A technical fabric of 100% cotton, woven on a historic shuttle loom. With firm selvedges, no unnecessary knots and not a single cut.
We were asked to make a very heavy 100% cotton fabric for technical use. It weighs almost 700 g/m² and is 160 cm wide. The fabric is stiff and very strong. On top of that, the customer added three requirements that turned an ordinary order into a challenge: firm selvedges, as few knots as possible and the whole length in one piece.
Why a historic shuttle loom
Firm selvedges were essential for the customer. That is why we put the order on one of our historic shuttle looms. The shuttle carrying the weft flies back and forth through the shed and the weft turns at the edges, so the fabric has a full, closed selvedge.

120 metres that must not be cut
Another unusual requirement was that the fabric had to stay in one piece. So we could not cut into the 120 metres of fabric; it had to be made as one long strip.
We therefore had to work out how to take the fabric away from the loom as we went. Above the loom it runs over rods and ropes further through the workshop, as you can see in the photos.

As few knots as possible
The fabric had to contain as few knots as possible. So we warped all the yarns without knotting. When the weft ran out during weaving, we did not tie it on; a new thread was always laid into the shed.

Old machines, new tasks
Our historic looms are not just a reminder of the past. On orders like this one, they show what they can do. Together with the hands and experience of our weavers, they can handle fabrics that are hard to make in ordinary production.
